About Dalian double column CNC car company and you talk about how line rail CNC car

Rail CNC car is through horizontal layout spindle machine milling machine tool, the design concept of the whole machine, considering each link of the machine tool, reserved machine interface for different customers, using the popular inverted T type dynamic column, the whole body structure, reasonable reinforcement optimize the exhaust structure and improve the rail lubrication recovery system, improve the overall rigidity and appearance quality of the casting.

Between cutting speed and processing quality, the choice of various cutting parameters will follow the law revealed by cutting theory.Processing beyond the limit value or at a higher spindle speed will cause the increase in the cutting temperature, the centrifugal force of the workpiece is greater, and may also cause the vibration of the machine tool.The higher the spindle speed, the greater the outward force (centrifugal force) of the tensile parts generated from the rotating shaft, especially in the finishing, the centrifugal force has a greater impact on the spindle bearing.

Today xiaobian to introduce the maintenance method of rail CNC car:

1. Do not start the main motor immediately after starting the main motor.The lubrication pump must work properly and the oil window comes to start the spindle to work.

2. Maintain the cleaning inside and outside of the machine tool, and the machine parts are complete, each wire rod and light rod are not oil-free black, and each guide rail surface is clean and intact.

3. Lubricate each lubrication point according to the prescribed requirements (see the signs of the machine tool lubrication system for details).

4. Pay attention to the operation of the oil pump to ensure that there is enough lubricating oil in the bedside box and the feed box. The lubricating oil in each box shall not be lower than the center of each oil mark, otherwise the machine tool will be damaged due to poor lubrication.

5. Check regularly and adjust the tightness of the vertical lathe triangle belt.

6. Clean the oil filter copper net of the oil filter at the oil inlet of the bedside box every week to ensure the cleaning of the lubricating oil.

7. The wire rod can only be used when cutting the threads to ensure its accuracy and life.

8. When the spindle rotates at high speed, the speed handle shall not be pulled under any circumstances.

I hope the above content can help you better understand the machine tool, Dalian Fenghua CNC machine tool Manufacturing Co., LTD. Xiaobian will regularly share more related product knowledge introduction for you!