20 years of focus

CNC machine tool design and manufacturer

  

0411-89832513

新闻

News Center

current position: Home > News Center > Technical information

Dalian single column double lift vertical lathe company will share with you the judgment standard of positive and negative cutter of single column vertical lathe

2022-03-15 14:18:46
times

大连单柱双升降立车

1、 Dalian single column double lift vertical lathe company will share with you the judgment standard of positive and negative knives of single column vertical lathe

Single column vertical lathe is one of the types of vertical lathes, and it is a type used more. Therefore, based on this point, and in addition, it is necessary to be familiar with and understand it in the website products. In this way, we can also have a good learning effect and know how to operate and use this kind of vertical lathe, so as to get the expected good use effect in the use of this product.

1. How does the hand wheel work on a single column vertical lathe?

Among the components contained in the single column vertical lathe, there is no handwheel from a professional point of view. Therefore, this question is not tenable and there is no specific answer. This kind of vertical lathe is generally electric tool walking. There is no hand wheel, but there is a fine-tuning rocker for adjustment.

2. Single column vertical lathe, whether to add oil or not, is judged by what? In addition, is the judgment of positive and negative knives the same as that of ordinary vertical lathes?

Whether oil should be added to the single column vertical lathe is mainly observed through the oil window, and then judged. Therefore, the oil window is very important and essential to the equipment. The judgment of positive knife and reverse knife is the same as that of ordinary vertical lathes. The knife block is placed directly first. If the inverted head is on the left, it is the positive knife and the knife head is on the right, it is the reverse knife.

2、 Do you know the fixed beam NC vertical lathe? Dalian Fenghua CNC Machine Tool Manufacturing Co., Ltd. and you talk about its characteristics

1. Fixed beam CNC vertical lathe, does it belong to fixed beam vertical lathe?

Fixed beam NC vertical lathe belongs to the category of vertical lathe, that is, NC vertical lathe. In addition, it also belongs to fixed beam vertical lathe. Therefore, we should have a correct understanding on this point, so as to avoid mistakes, and avoid wrong ideas on the attribute understanding of fixed beam NC vertical lathe. For this question, it is obvious that the answer is to belong to.

2. What are the characteristics of fixed beam NC vertical lathe? In addition, how does it up and down the beam?

From a professional point of view, the feature of fixed beam NC vertical lathe is to fix its beam without stroke, and it does not have side tool rest. The specific method of raising the beam in the equipment is as follows: if the beam has a hierarchical positioning mechanism, first release the oil cylinder, and then move the button on the button panel. Or, read the product manual carefully and follow its specific instructions.

3. What is double column fixed beam NC vertical lathe?

The double column fixed beam NC vertical lathe is one of the fixed beam NC vertical lathe, which can also be said to be one of the NC vertical lathe. Its structure consists of worktable, column, beam, sliding seat, ram, electric knife table, tool carrier, planetary gear reducer, AC servo motor and hydraulic station. Moreover, it is widely used and can be used for turning in many industries to obtain satisfactory machining results.

 


Recently Viewed:

Related products

news.related_news