What problems will appear in Dalian single column double lift vertical car

1、 What problems will appear in Dalian single column double lift vertical car

1. Fever

That is, the temperature rises too fast, which makes the temperature value exceed the limit of the regular value, and even presents bad phenomena such as smoking.

2. Stir

It means that the sensational fluctuation of the fuselage and its moving parts exceeds the allowable scale of the rules and becomes abnormal.

3. Abnormal movement

Abnormal movement refers to the impact sound, conflict sound or impact sound inside the vertical lathe.

4. Creeping and impact movement

It is mainly shown on the guide rail of the sliding conflict surface, which is mainly slow and fast, or short time, suspension and sudden travel. The speed is uneven and irregular.

5. Gear tooth collapse

The main reason is that metal breaking sound will be heard, and periodic abnormal sound will occur at the transmission part.

2、 Maintenance method of single column vertical lathe

Before operation:

1. We should strictly follow the scheme of smooth chart to refuel, and be punctual, quantitative and qualitative.

2. If we want to start a machine that doesn't need more than 8 hours, we should roll at a low speed for 3-5 minutes to see if its smooth system is unblocked. The operation of other parts is abnormal, and then we are operating.

During operation:

1. Check the rolling of all parts of the equipment and the operation condition of the smooth system. If there is any abnormality, inform the inspector in time.

2. It is forbidden to put things, workpieces, metal objects and pedals on the rail surface and protective cover.

After operation:

1. Wipe the iron filings and coolant from the guide rail.

2. Clean the iron filings and sundries around the equipment.