Dalian single column double lift vertical lathe manufacturer will talk to you about the installation process of single column vertical lathe

1、 Dalian single column double lifting manufacturer will talk to you about the installation process of single column vertical lathe

1. Before starting work, all personnel shall study carefully and wear labor protection articles.

2. The installation personnel shall obey the command and cooperate with each other. They shall not operate blindly.

3. There shall be a person in charge of installation, and the person in charge of installation shall supervise the installation site and check the operation condition and progress.

4. Before installing the lathe, the site shall be cleaned first, and there shall be no sundries within 5m around the machine.

5. The hoisting of the fuselage and motor shall be supervised and guided by professionals on site to ensure that there are no problems and damage to the fuselage and motor.

6. During the installation of single column vertical lathe, no one is allowed to stand under the lifted weight to avoid personal injury caused by the movement of the lifted object.

7. Professional tools shall be used to detect the depth of screw holes, and fingers shall not be used to measure, so as to avoid danger.

8. An adjusting sizing block shall be placed near the anchor bolt of the lathe to adjust the levelness of the lathe.

9. Connect the circuit according to the electrical wiring diagram to avoid wrong connection.

10. Check whether the motor placement direction, rapid feed, beam lifting and other movement directions are correct.

11. During the test run, there should be no one in front of the rotating part of the machine.

2、 Characteristics of CNC vertical lathe

1. Good precision and multiple functions;

2. It can realize stepless speed regulation;

3. Good economy and reasonable structure.

3、 Safety operation specification for CNC vertical lathe

1. The machine tool cannot be started arbitrarily without permission;

2. Operators shall wear labor protection articles before operation to ensure their own safety;

3. Before using the lathe, check the power connection line and control line first, and there must be under overvoltage or phase loss;

4. Check the workpiece, cutting tool, etc. to confirm whether it can be operated safely;

5. The internal setting of the lathe cannot be changed at will to avoid problems;

6. The vertical lathe cannot be unattended during operation. If the program is wrong or the operation is unstable, it shall be shut down immediately and then handled by professionals;

7. Before starting the lathe, close the protective cover first;

8. No objects can be placed on the lathe, let alone touching switches and buttons with wet hands to avoid electric shock;

9. Once the lathe breaks down, the power supply shall be cut off immediately. It is strictly prohibited to work with the machine in order to avoid damaging the machine;

10. The CNC vertical lathe and working environment shall be kept clean and tidy. After the work is completed, the site shall be cleaned, the machine shall be cleaned, and the operation records shall be made.