Single column fixed beam CNC vertical lathe which is good

Single column fixed beam CNC vertical lathe which is good

What are the electrical fault maintenance methods of NC vertical lathe?

The CNC system of today's CNC vertical lathe has entered the PC based and open development stage, in which the software content is more and more abundant, including system software, machine tool manufacturer software, and even the user's own software. Due to some inevitable problems in the design of software logic, some fault states can not be analyzed, such as crash. For this kind of fault phenomenon, special measures can be taken to deal with it. For example, the whole machine can be powered off and restarted after a pause. Sometimes, the fault may be eliminated. Maintenance personnel can explore their laws or other effective methods in their long-term practice.

Troubleshooting the electrical system of CNC vertical lathe is a difficult project for many people. These basic troubleshooting knowledge hope to deal with the small troubles in the process of using the machine tool. The troubleshooting process of the electrical system of the NC vertical lathe can be roughly divided into three parts: investigation, analysis and diagnosis. For the NC vertical lathe to find out the cause of damage, the fault can be basically eliminated. Therefore, the analysis and diagnosis of fault methods has become very important. Simply put, it is to use sensory examination. Carefully ask the fault site personnel about the process, appearance and consequences of the fault, and may ask many times in the whole process of analysis and judgment.

CNC vertical lathe CNC system, PLC and servo drive system are set with many modifiable parameters to meet the requirements of different machine tools and different working states. These parameters can not only match the electrical system with the specific machine tool, but also be necessary to optimize the functions of the machine tool.

When the fault analysis results focus on a printed circuit board, it is very difficult to implement the fault in a certain area or even a component due to the continuous expansion of circuit integration. In order to shorten the shutdown time, the spare parts can be replaced under the condition of the same spare parts, and then the faulty board can be inspected and repaired. Pay attention to the following problems when replacing the spare parts board. The replacement of any spare parts must be carried out under the condition of power failure.

Dalian Fenghua CNC Machine Tool Manufacturing Co., Ltd. is a professional machine tool equipment manufacturer specializing in CNC vertical lathe, Dalian single column double lifting vertical lathe, Dalian double column CNC vertical lathe and Dalian high-speed CNC lathe. Friends from all walks of life are welcome to negotiate and consult!